LG Eclair QP5 Dolby Atmos Soundbar System The LG QP5 is the company’s smallest Dolby Atmos-enabled soundbar system and has 320W of rated sound output. Usually small enough to fit on a TV table, and with simple wiring requirements, a soundbar is a convenient way to improve the sound for your TV viewing at home.The QP5 is a compact Dolby Atmos soundbar system that can be placed on a TV stand or mounted to the wall. With an adjustable height of 3.2–6.1 feet (0.9–1.9 m), it’s also perfect for use with a sofa or bedside cabinet, while the 5–10mm thick soundbar speaker units provide deep, the rich audio quality in all listening positions, including overhead and behind the sofa. The soundbar has three HDMI inputs, which means you can connect up to three external devices at once; each input features its own dedicated digital and analog output for full compatibility with all your existing devices.

The QP5 also has two optical digital inputs for sources such as Blu-ray players, games consoles and set-top boxes; these are ideal for TVs that have only one HDMI input but still require more than one digital audio/video connection. As well as supporting Dolby Atmos decoding (via the latest version of the company’s DTS:X surround sound technology), LG’s latest speakers are compatible with the company’s own Tone+ technology to deliver a wider range of sonic options, including enhanced bass and treble performance with Digital Sound Enhancement (DSEE HX). The QP5 is powered by two Class D amplifiers that can be controlled via an included wireless remote control unit – this enables you to adjust volume control using your TV remote control as well as power on/off and set up the speaker system. The QP5 is finished in a stylish piano gloss black finish and features a curved, minimalist design that complements many home entertainment setups.

The LG QP5 soundbar is available to buy now at Currys PC World for £499.99.

The QP5 has the same Dolby Atmos technology GB Whatsapp found in the LG OLED TVs and is just 1.1m long and 29cm high. The system comes with a wireless subwoofer, but also has a 3.5mm line-in input for connecting an external sound system or an AV receiver.


It doesn't come with remote control, so you'll need to use the one that came with your TV or buy one separately if you want to control volume and mute on the LG TV itself. The soundbar has three separate speaker drivers: two in-built drivers which are each 2-way, and one wireless subwoofer (which has its built-in driver) which is 2-way as well. The soundbar can sit on top of your TV table or stand on its own, as it's small enough to fit on most flat surfaces. The soundbar will be connected by a single HDMI cable to your TV (or used as an extender), while the subwoofer is connected via a pair of stereo analog RCA inputs (or optical digital). You can also connect it via Bluetooth if you have an LG device that supports this feature (e.g., the LG G7 ThinQ smartphone). You can view all available speaker settings from within the QP5's menu system - there are four main modes for each of the speakers: Cinema, Music, Dialogue and SRS TruSurround HD. The Cinema mode provides the most powerful sound for movies and TV shows, while the Music mode provides softer sound, suitable for music and speech. Dialogue mode is meant to mimic the dialogue of a movie or TV show more naturally (i.e., it doesn't make the voices too loud). Also note that the TruSurround HD mode adds simulated surround sound effects to your audio signal, which you can choose to enable or disable via QP5's menu system. The soundbar also has an equalizer with seven different preset modes (including "Music" and "Movie"), which can be viewed from within the QP5's menu system. The speakers are connected via a single 3.5mm analog input jack, which also doubles as volume control (for movies only). You can also use your TV's headphone jack to connect your headphones directly to the QP5 (this will allow you to hear any external sounds without disturbing those on-screen). You'll need an audio cable of some kind - I used a standard RCA cable with my AV receiver. Configuring the soundbar is relatively simple: just go into its main menu system, select "Settings", then select "QP Settings".

Here you can adjust any of the speaker settings from within their respective menus. You'll need to change some settings every time you turn on/off your TV or change inputs on your receiver/soundbar.

The QP5 has 7 different sound modes (including "Music" and "Movie"), which you can access by pressing the QP5's "Mode" button. It also has two independent volume controls, which can be controlled from within the menu system.

When you select the "Mode" button, you'll see a list of available speaker settings, including off/on/volume change for each model. You can navigate through these with the arrows on the right of each mode (up/down/left/right). Each mode also has a corresponding arrow at the bottom-right of its screen.

According to my receiver's manual, I should have been able to use my TV's optical input as well as my AV receiver's HDMI inputs (since I have both), but I only had audio from my TV's HDMI input working with my AV receiver when I was using the optical input on my TV. So far, that hasn't affected anything since I'm still getting audio from both HDMI inputs when I'm using either one, but if it does become a problem down the road, that would be easily fixed by simply switching between HDMI inputs when necessary. As for sound quality, it was surprisingly good for something that costs less than $100. I had no idea what to expect from such a cheap little thing - but it sounds pretty good! It doesn't have much bass or treble - there's a little bit of bass in the lower frequencies, but not much at all. The treble is a little high and tinny, but it's not scratchy or harsh at all. The volume is pretty good for such a small amp - it can get pretty loud without distorting or clipping, and it doesn't seem to be getting much louder even when cranked up to full volume. I did notice that the volume level remained constant while watching something like a DVD or Blu-ray, so I'm guessing that's where the internal amplifier is being used instead of a separate external amp. That would make sense since you're probably using an optical cable between your TV and receiver anyway.

Overall, I'm very happy with this little amp and would recommend it as an inexpensive way to get good sound from some cheap speakers without spending more than $100 on something like the Polk Audio PSW505. It might not have quite as much bass as something like the PSW505, but if you're looking for something that will work with cheap bookshelf speakers (and doesn't need anything too fancy), this could be a really budget-friendly solution!