The principles of Endoscope Camera Module Manufacturer are similar to the optical mirror. In order to enter the small hole, we choose the fiber mirror. The clarity of the fiber mirror depends on the number of fiber beams.

Fiber endoscopy: apex, bending part, insertion department, operating department, lighting hose, lighting connection part, eyepiece apex into a rigid segment, with direct vision (front -aversion), side vision, strabismus, squinting Mode. Gastroscopy has a direct vision, and the duodenic esophageal mirrors adopt side vision. The apex is: objective mirror pores (guide beams), light holes (lighting beams), gas pores (nozzles), biopsy holes. The bending part uses four steel wire traction methods. There are four steel wires connected to the control department on the head. Twist the upper, lower left and right hand wheels of the control department, which can pull the wire in different directions to swing the curved head in the corresponding direction. (Endoscope Camera Module Manufacturer) The bending part has a light guide bundle, guidance beam, various pipes, and traction devices, bending pipes, bending rubber.

The hose department includes the bending department and the insertion department, also known as the snake tube. Including light guide bundles, guides, water gas pipes, biopsy pipelines (also attracting pipes), traction steel wires, outsourcing stainless steel band hose and metal mesh pipes,*outer layers are smooth plastic pipes. The fiber bundle of the conductive image constitutes the core part of the fiber endoscopy. It consists of tens of thousands of extremely fine glass fibers. According to the principle of optical full reflection, all glass fibers must be covered with a lower layer of refractive liability film to use it with a lower refractive index, so Ensure that the light of all core fibers can be reflected. The transmission of single -rooted fiber can only produce one light spots. To see the image, you must put a large number of fiber integrated beams. To pass the image to the other end to the same image, you must make each fiber in its it The positions arranged at both ends are the same, and they are called guidance beams. A guide image is broken, and the imaging is one more black spot. The light guide bundle does not require the same position, and the brightness of the disconnection of many roots is significantly weakened.

endoscope camera module manufacturer https://www.hengal-tech.com/p-Camera-Module/4.html